SUBMERSIBLE PUMP CONTROL & INSTUMENTATION CABLE
P7266-SP Water Well - Round
DESCRIPTION:	600 Volt Multi-conductor THHN/PVC UL listed Type TC
VOLTAGE:	600V
INSULATION:	HIGH DIELECTRIC PVC
OUTER JACKET:	PVC - Polyvinyl Chloride
SIZES:	18 AWG -10 AWG
TEMP DRY/WET:	90°C Dry, 75°C Wet
SCOPE:	Three or more conductors having TFFN or VW-1 THHN/THWN (PVC/Nylon) conductors with PVC jacket conforming to Article 318 "Cable Trays" and Article 340 "Power and Control Cable Type TC". Direct Burial. Passes 210,000 BTU flame test and suitable for use as submersible cable.
APPROVALS:
SUBMERSIBLE POWER CABLE - HIGH DIELECTRIC
P7267-SP Water Well - Round
DESCRIPTION:	600 Volt 2/C, 3/C & 4/C Submersible Power Cable PVC/PVC
VOLTAGE:	600V
INSULATION:	HIGH DIELECTRIC PVC
OUTER JACKET:	Chloride
SIZES:	8 AWG - 500 MCM
TEMP DRY/WET:	90°C Dry, 75°C Wet
SCOPE:	Two, three or four conductors having TFFN or VW-1 THHN/THWN (PVC/Nylon) conductors with PVC jacket conforming to Article 318 “Cable Trays” and Article 340 “Power and Control Cable Type TC”. Direct Burial. Passes 210,000 BTU flame test and suitable for use as submersible cable.
APPROVALS:
SUBMERSIBLE PORTABLE CORD
P7342-SP Water Well - Round, Mining Series
DESCRIPTION:	600 Volt Multiple Conductors Flexible EPR/CPE
VOLTAGE:	600V
INSULATION:	EPR - Ethylene Propylene Rubber
OUTER JACKET:	CPE - Chlorinated Polyethylene Rubber
SIZES:	#18 - 2 AWG
TEMP DRY/WET:	90°C Dry, 90°C Wet Min. ambient temp. -40°C
SCOPE:	Flexible Submersible Pump Cable designed for use submersible and industrial applications suitable for continuous submersion. This portable service cord oil and water resistant, integral filled, easy to strip and made without fillers. Impact, Abrasion, Ozone, Sun, Weather, Heat, Oil, and Flame resistant.
APPROVALS:
SUBMERSIBLE PORTABLE CORD
P7365-SP Water Well - Round, Mining Series
DESCRIPTION:	300 Volt Multiple Conductors Flexible EPR/CPE
VOLTAGE:	300V
INSULATION:	EPR - Ethylene Propylene Rubber
OUTER JACKET:	CPE - Chlorinated Polyethylene Rubber
SIZES:	#18/4 - #10/4
TEMP DRY/WET:	90°C Dry, 90°C Wet Min. ambient temp. -40°C
SCOPE:	Flexible Submersible Pump Cable designed for use submersible and industrial applications suitable for continuous submersion. This portable junior service cord oil and water resistant, integral filled, easy to strip and made without fillers. Impact, Abrasion, Ozone, Sun, Weather, Heat, Oil, and Flame resistant.
APPROVALS:
ARMORED SUBMERSIBLE PUMP CABLE
P7307-SP Water Well - Round, Armored
DESCRIPTION:	600 Volt 3/C & 4/C with Ground XLPE/AIA/PVC
VOLTAGE:	600V
INSULATION:	XLPE
OUTER JACKET:	PVC - Polyvinyl Chloride
SIZES:	14 - 500 MCM, 2 & 3 Conductor without Ground
TEMP DRY/WET:	90°C Dry, 7590°C Dry, 90°C WetC Wet
SCOPE:	Designed for use as a power cable where maximum protection is required. Direct burial rated and UL listed wet locations, Type MC. Good for use as a submersible cable.
APPROVALS:
SUB-TECK ARMORED PUMP CABLE
P7366-SP Water Well - Round, Armored
DESCRIPTION:	600/1000 Volt 3C with Ground XLPE/AIA/PVC
VOLTAGE:	1000V
INSULATION:	XLPE
INSULATION JACKET:	PVC - Polyvinyl Chloride
OUTER JACKET:	PVC - Polyvinyl Chloride
SIZES:	8 AWG - 750 MCM
TEMP DRY/WET:	90°C Dry, 90°C Wet
ARMOR:	Interlocked Armor (Aluminum or Galvanized Steel)
SCOPE:	Armored and designed for maximum continuous conductor temperature of 90°C with emergency overload of 130°C and a short circuit condition of 250°C, type Teck90. Suitable for severe conditions in industrial applications and wet locations. Cables may be installed in racks, trays ladders and cable troughs, are rated for hazardous locations and suitable for use as a submersible cable.
APPROVALS:
SUBMERSIBLE INDUSTRIAL PORTABLE POWER CABLE
P7282-SP Water Well - Round, Mining Series
DESCRIPTION:	600/2000 Volt 2/C, 3/C & 4/C no Ground EPR/CPE
VOLTAGE:	2000V
INSULATION:	EPR - Ethylene Propylene Rubber
OUTER JACKET:	CPE - Chlorinated Polyethylene Rubber
SIZES:	8 AWG - 500 MCM
TEMP DRY/WET:	90°C Dry, 90°C Wet
SCOPE:	Round cable designed for use in deep well submersible in fresh or salt water suitable for continuous submersion to 984' and temporary power supply where grounded circuits are not required. Dual rated submersible Type W. Impact, Abrasion, Ozone, Sun, Weather, Heat, Oil, and Grease resistant.
APPROVALS:
HEAVY DUTY, ROUND RUBBER, SUBMERSIBLE PUMP CABLE
P7279-SP Water Well - Round, Mining Series
DESCRIPTION:	2000 Volt 3/C with Ground & Ground check EPR/CPE
VOLTAGE:	2000V
INSULATION:	EPR - Ethylene Propylene Rubber
OUTER JACKET:	CPE - Chlorinated Polyethylene
SIZES:	8 AWG - 500 MCM 3 Conductor with Ground and Ground checks
TEMP DRY/WET:	90°C Dry, 90°C Wet, Min. ambient temp. -40°C
SCOPE:	Extra-Hard Usage, Oil Resistant, Flexible Submersible Pump Cable designed for use as heavy duty deep well fresh or salt water suitable for continuous submersion to 984’. The cable is dual rated for submersible and GG-C applications and is especially efficient for use in municipal applications, cold weather and high ampacity requirements where round cable is preferred. Impact, Abrasion, Ozone, Sun, Weather, Heat, Oil, and Flame resistant.
APPROVALS:
ARMORED SUBMERSIBLE PUMP CABLE 5kV
P7308-SP Water Well - Round, Armored, Medium Voltage
DESCRIPTION:	5000 Volt 3C with Ground XLPE/AIA/PVC
VOLTAGE:	5000V
INSULATION:	XLPE
OUTER JACKET:	PVC
SIZES:	8 AWG - 750 MCM
TEMP DRY/WET:	90°C Dry, 90°C Wet
ARMOR:	Interlocked Armor (Aluminum or Galvanized Steel)
SCOPE:	Armored, shielded and UL listed wet and dry locations. Suitable for use as a submersible cable. Direct Burial rated.
APPROVALS:
ARMORED SUBMERSIBLE PUMP CABLE 5kV
P7375-SP Water Well - Round, Armored, Medium Voltage
DESCRIPTION:	5000 Volt 3C with Ground XLPE/AIA/PVC
VOLTAGE:	5000V
INSULATION:	EPR - Ethylene Propylene Rubber
OUTER JACKET:	PVC
SIZES:	8 AWG - 750 MCM
TEMP DRY/WET:	90°C Dry, 90°C Wet
ARMOR:	Interlocked Armor (Aluminum or Galvanized Steel)
SCOPE:	Armored, shielded and UL listed wet and dry locations. Suitable for use as a submersible cable. Direct Burial rated.
APPROVALS:
SUBMERSIBLE PUMP POWER CABLE
P7376-SP Water Well - Round, Medium Voltage
DESCRIPTION:	5000 Volt Round Shielded 3C with Ground EPR/PVC
VOLTAGE:	5000V
INSULATION:	EPR - Ethylene Propylene Rubber
OUTER JACKET:	PVC
SIZES:	8 AWG - 750 MCM
TEMP DRY/WET:	90°C Dry, 75°C Wet
SCOPE:	Shielded, Medium Voltage and UL listed wet and dry locations. Suitable for use as a submersible cable. Direct Burial rated.
APPROVALS:
SUBMERSIBLE PUMP POWER CABLE
P7311-SP Water Well - Round, Medium Voltage
DESCRIPTION:	5000 Volt Round Shielded 3C with Ground XLPE/PVC
VOLTAGE:	5000V
INSULATION:	XLPE
OUTER JACKET:	PVC
SIZES:	8 AWG - 750 MCM
TEMP DRY/WET:	90°C Dry, 75°C Wet
SCOPE:	Shielded, Medium Voltage and UL listed wet and dry locations. Suitable for use as a submersible cable. Direct Burial rated.
APPROVALS:
HYDROFLEX/5kV - Round, Medium Voltage
P7341-SP Water Well - Round, Mining Series
DESCRIPTION:	5000 Volt 3/C with Ground, EPR/Shielded/Neoprene Power Cable
VOLTAGE:	5000V
INSULATION:	EPR - Ethylene Propylene Rubber
OUTER JACKET:	Neoprene
SIZES:	6 AWG - 500 MCM
TEMP DRY/WET:	90°C Dry, 90°C Wet, ambient temp. -40°C
SCOPE:	Shielded, Medium Voltage, High ampacity, Flexible Submersible Pump Cable designed for use as heavy duty deep well fresh or salt water suitable for continuous submersion to 984'. Dual rated submersible and SHD-GC. Impact, Abrasion, Ozone, Sun, Weather, Heat, Oil, and Flame resistant.
APPROVALS: