FLAT-WEBBED - FLEXIBLE Pump Cable
P7344-SP Methane
DESCRIPTION:	600 Volt 3/C with Ground Webbed THHN/PVC
VOLTAGE:	600V
INSULATION:	EPR
OUTER JACKET:	Nitrile
SIZES:	14 AWG
TEMP DRY/WET:	90°C Dry, 90°C Wet
SCOPE:	Rubber motor lead cable meets US standards with three parallel conductors and a ground separated by rib for easy installation. Designed to operate electrical motors underwater and bond to submersible plugs through vulcanization and epoxy/resin methods. Cable utilizes stranded coated copper conductors with ethylene propylene rubber (EPR) insulation and a Red nitrile jacket.
APPROVALS:
IMPACT - METHANE Pump Cable
P7331-SP Methane
DESCRIPTION:	600 Volt 3/C with Ground THHN/HDPE
VOLTAGE:	600V
INSULATION:	PVC - Polyvinyl Chloride
INSULATION JACKET:	Nylon
OUTER JACKET:	HDPE High Density Polyethylene
SIZES:	10 AWG - 4 AWG
TEMP DRY/WET:	90°C Dry, 75°C Wet
SCOPE:	Cable is designed for extra hard duty use in Methane mines where flexibility and the toughness of armor is needed. The jacket, made with an extra hard duty, abrasion and impact resistant compound, minimizes potential damage and stops gas from migrating in the first place. Tight construction minimizes potential gas migration should the jacket be damaged. The cable is rated for use in Deep Well Submersible Methane Gas Applications at temperatures not to exceed 75°C Wet.
APPROVALS:
Armored Solid Core Methane
P7373-SP Methane - Armored
DESCRIPTION:	2000 Volt 3/C with Ground ARMORED METHANE XLPE/PVC/AIA/PVC
VOLTAGE:	2000V
INSULATION:	XLPE over Solid Conductors
INSULATION JACKET:	Pressure Extruded PVC
OUTER JACKET:	PVC (optional)
SIZES:	4 AWG
TEMP DRY/WET:	90°C Dry, 90°C Wet
ARMOR:	Aluminum Interlock Armor
SCOPE:	Multi-Conductor, 600-2000 volt Power cable with cross linked polyethylene (XLPE) insulated circuit conductors, an inner polyvinyl chloride (PVC) jacket, and aluminum interlocked armor, without an overall jacket. The cable is also suitable in cable trays or aerial installations.
STEELFLEX
P7343-SP Methane - Armored
DESCRIPTION:	600V STEELFLEX Methane ARMORED XLPE/PVC/SWA/PE
VOLTAGE:	600V
INSULATION:	XLPE
INSULATION JACKET:	PVC Compound
OUTER JACKET:	Polyethylene
SIZES:	6 AWG - 4 AWG, 3 Conductor with Ground (insulated or non insulated)
TEMP DRY/WET:	90°C Dry, 90°C Wet
ARMOR:	Galvanized Steel Wire
SCOPE:	Steel Wire Armored cable is integral filled to eliminate gas migration and is rated for use in Deep Well Submersible Methane Gas. Outer jacket is special black flame retardant PE type ST7 FR acc. to IEC 60502-1.
Armored Methane
P7377-SP Methane - Armored
DESCRIPTION:	600V AIA Armored Methane XHHW/AIA/PVC
VOLTAGE:	600V
INSULATION:	PVC
SIZES:	4 AWG
TEMP DRY/WET:	90°C Dry, 75°C Wet
ARMOR:	Aluminum Interlock Armor
SCOPE:	Aluminum Interlock Armored cable with overall PVC jacket is rated for use in Deep Well Submersible Methane Gas.
APPROVALS: