HYDROFLEX - Flexible Rubber Submersible Pump cable
P7327-SP Water Well - Flat
DESCRIPTION:	600 Volt 2 & 3/C with Ground Flexible EPR/TPE Power & Control Cable
VOLTAGE:	600V
INSULATION:	EPR - Ethylene Propylene Rubber
OUTER JACKET:	TPE - Thermoplastic Elastomer
SIZES:	#12 - #6 AWG 2 & 3 Conductor with Ground
TEMP DRY/WET:	90°C Dry, 90°C Wet, Min. ambient temp. -40°C
SCOPE:	Extra Flexible, High Ampacity, Flat Rubber Submersible Pump Cable suitable for use within well casings for wiring deep-well submersible water pumps.
APPROVALS:
HYDROFLEX - Flexible Rubber Submersible Pump cable
P7326-SP Water Well - Flat, Mining Series
DESCRIPTION:	PUMPWIRE 1kv
VOLTAGE:	600/2kV
INSULATION:	EPR - Ethylene Propylene Rubber
OUTER JACKET:	CPE - Chlorinated Polyethylene Rubber
SIZES:	4 - 500 MCM
TEMP DRY/WET:	90°C Dry, 90°C Wet, Min. ambient temp. -40°C
SCOPE:	Extra Flexible, high ampacity, Flat Rubber Submersible Pump Cable for use within well casings for wiring deep-well submersible water pumps, mining applications. Hydroflex is especially efficient for use in municipal applications, cold weather and high ampacity requirements.
APPROVALS:
HYDROFLEX/TUF-HIDE
P7330-SP Offshore - Flat
DESCRIPTION:	600 Volt 3/C no Ground EPR/BLUE-NBR/PVC/TUF-HIDE
VOLTAGE:	600V
INSULATION:	EPR
INSULATION JACKET:	Blue NBR/PVC
OUTER JACKET:	Clear Tuf-Hide
SIZES:	8 AWG - 2/0 AWG
TEMP DRY/WET:	90°C Dry, 75°C Wet
SCOPE:	Flat submersible pump cables for use within the well casing for deep-well water pumps, off-shore applications where flexible cut resistant properties are required. Cable is integral filled to eliminate gas wicking possibilities.
APPROVALS:
SUBMERSIBLE PORTABLE CORD
P7342-SP Water Well - Round, Mining Series
DESCRIPTION:	600 Volt Multiple Conductors Flexible EPR/CPE
VOLTAGE:	600V
INSULATION:	EPR - Ethylene Propylene Rubber
OUTER JACKET:	CPE - Chlorinated Polyethylene Rubber
SIZES:	#18 - 2 AWG
TEMP DRY/WET:	90°C Dry, 90°C Wet Min. ambient temp. -40°C
SCOPE:	Flexible Submersible Pump Cable designed for use submersible and industrial applications suitable for continuous submersion. This portable service cord oil and water resistant, integral filled, easy to strip and made without fillers. Impact, Abrasion, Ozone, Sun, Weather, Heat, Oil, and Flame resistant.
APPROVALS:
SUBMERSIBLE PORTABLE CORD
P7365-SP Water Well - Round, Mining Series
DESCRIPTION:	300 Volt Multiple Conductors Flexible EPR/CPE
VOLTAGE:	300V
INSULATION:	EPR - Ethylene Propylene Rubber
OUTER JACKET:	CPE - Chlorinated Polyethylene Rubber
SIZES:	#18/4 - #10/4
TEMP DRY/WET:	90°C Dry, 90°C Wet Min. ambient temp. -40°C
SCOPE:	Flexible Submersible Pump Cable designed for use submersible and industrial applications suitable for continuous submersion. This portable junior service cord oil and water resistant, integral filled, easy to strip and made without fillers. Impact, Abrasion, Ozone, Sun, Weather, Heat, Oil, and Flame resistant.
APPROVALS:
SUBMERSIBLE INDUSTRIAL PORTABLE POWER CABLE
P7282-SP Water Well - Round, Mining Series
DESCRIPTION:	600/2000 Volt 2/C, 3/C & 4/C no Ground EPR/CPE
VOLTAGE:	2000V
INSULATION:	EPR - Ethylene Propylene Rubber
OUTER JACKET:	CPE - Chlorinated Polyethylene Rubber
SIZES:	8 AWG - 500 MCM
TEMP DRY/WET:	90°C Dry, 90°C Wet
SCOPE:	Round cable designed for use in deep well submersible in fresh or salt water suitable for continuous submersion to 984' and temporary power supply where grounded circuits are not required. Dual rated submersible Type W. Impact, Abrasion, Ozone, Sun, Weather, Heat, Oil, and Grease resistant.
APPROVALS:
HEAVY DUTY, ROUND RUBBER, SUBMERSIBLE PUMP CABLE
P7279-SP Water Well - Round, Mining Series
DESCRIPTION:	2000 Volt 3/C with Ground & Ground check EPR/CPE
VOLTAGE:	2000V
INSULATION:	EPR - Ethylene Propylene Rubber
OUTER JACKET:	CPE - Chlorinated Polyethylene
SIZES:	8 AWG - 500 MCM 3 Conductor with Ground and Ground checks
TEMP DRY/WET:	90°C Dry, 90°C Wet, Min. ambient temp. -40°C
SCOPE:	Extra-Hard Usage, Oil Resistant, Flexible Submersible Pump Cable designed for use as heavy duty deep well fresh or salt water suitable for continuous submersion to 984’. The cable is dual rated for submersible and GG-C applications and is especially efficient for use in municipal applications, cold weather and high ampacity requirements where round cable is preferred. Impact, Abrasion, Ozone, Sun, Weather, Heat, Oil, and Flame resistant.
APPROVALS:
ARMORED SUBMERSIBLE PUMP CABLE 5kV
P7375-SP Water Well - Round, Armored, Medium Voltage
DESCRIPTION:	5000 Volt 3C with Ground XLPE/AIA/PVC
VOLTAGE:	5000V
INSULATION:	EPR - Ethylene Propylene Rubber
OUTER JACKET:	PVC
SIZES:	8 AWG - 750 MCM
TEMP DRY/WET:	90°C Dry, 90°C Wet
ARMOR:	Interlocked Armor (Aluminum or Galvanized Steel)
SCOPE:	Armored, shielded and UL listed wet and dry locations. Suitable for use as a submersible cable. Direct Burial rated.
APPROVALS:
SUBMERSIBLE PUMP POWER CABLE
P7376-SP Water Well - Round, Medium Voltage
DESCRIPTION:	5000 Volt Round Shielded 3C with Ground EPR/PVC
VOLTAGE:	5000V
INSULATION:	EPR - Ethylene Propylene Rubber
OUTER JACKET:	PVC
SIZES:	8 AWG - 750 MCM
TEMP DRY/WET:	90°C Dry, 75°C Wet
SCOPE:	Shielded, Medium Voltage and UL listed wet and dry locations. Suitable for use as a submersible cable. Direct Burial rated.
APPROVALS:
HYDROFLEX/5kV - Round, Medium Voltage
P7341-SP Water Well - Round, Mining Series
DESCRIPTION:	5000 Volt 3/C with Ground, EPR/Shielded/Neoprene Power Cable
VOLTAGE:	5000V
INSULATION:	EPR - Ethylene Propylene Rubber
OUTER JACKET:	Neoprene
SIZES:	6 AWG - 500 MCM
TEMP DRY/WET:	90°C Dry, 90°C Wet, ambient temp. -40°C
SCOPE:	Shielded, Medium Voltage, High ampacity, Flexible Submersible Pump Cable designed for use as heavy duty deep well fresh or salt water suitable for continuous submersion to 984'. Dual rated submersible and SHD-GC. Impact, Abrasion, Ozone, Sun, Weather, Heat, Oil, and Flame resistant.
APPROVALS:
2000V SUBMERSIBLE MOTOR LEAD
P7305-SP Water Well - Single, Mining Series
DESCRIPTION:	2000 Volt Single Conductor Portable Extra Flexible EPDM/CPE
VOLTAGE:	2000V
INSULATION:	EPR - Ethylene Propylene Rubber
OUTER JACKET:	CPE
SIZES:	16 AWG - 1111 MCM
TEMP DRY/WET:	90°C Dry, 90°C Wet
SCOPE:	Single conductor submersible pump cable and motor lead RHH/RHW-2/RW90. Dual rated submersible Type DLO. Impact, Abrasion, Ozone, Sun, Weather, Heat, Oil, and Flame resistant.
APPROVALS:
RUBBER SUBMERSIBLE PUMP LEAD CABLE
P7254-SP Water Well - Flat Motor Lead Cable
DESCRIPTION:	600 Volt 4/C 14 AWG EPR/Nitrile
VOLTAGE:	600V
INSULATION:	EPR
OUTER JACKET:	Nitrile
SIZES:	14 AWG
TEMP DRY/WET:	90°C Dry, 90°C Wet
SCOPE:	Rubber motor lead cable meets US standards with three parallel conductors and a ground separated by rib for easy installation. Designed to operate electrical motors underwater and bond to submersible plugs through vulcanization and epoxy/resin methods. Cable utilizes stranded coated copper conductors with ethylene propylene rubber (EPR) insulation and a Red nitrile jacket.
APPROVALS:
INTERNATIONAL RUBBER SUBMERSIBLE PUMP LEAD CABLE
P7270-SP Water Well - Flat Motor Lead Cable
DESCRIPTION:	600 Volt 4/C 1.5mm2 EPR/Nitrile
VOLTAGE:	600V
INSULATION:	EPR
OUTER JACKET:	Nitrile
SIZES:	1.5mm2
TEMP DRY/WET:	90°C Dry, 90°C Wet
SCOPE:	Rubber motor lead cable meets international standards with three parallel conductors and a ground separated by rib for easy installation. Designed to operate electrical motors underwater and bond to submersible plugs through vulcanization and epoxy/resin methods. Cable utilizes stranded coated copper conductors with ethylene propylene rubber (EPR) insulation and a Blue nitrile jacket.
APPROVALS:
Rubber Submersible Pump LEAD WIRE
P7196-SP Water Well - Lead Wire
DESCRIPTION:	600 Volt EPR/Hypalon Motor Lead
VOLTAGE:	600V
INSULATION:	EPR
OUTER JACKET:	CSPE (Hypalon)
SIZES:	14 - 4 AWG
TEMP DRY/WET:	75°C Dry, 75°C Wet
SCOPE:	Designed to operate electrical motors underwater, utilizing stranded coated copper conductors with ethylene propylene rubber (EPR)-hypalon insulation and jacket.
APPROVALS: