PUMPWIRE - Heavy Duty Flat Submersible Pump Cable WITH GROUND
P7271-SP Water Well - Flat
DESCRIPTION:	600V 3/C with Ground THHN/PVC Power & Control
VOLTAGE:	600V
INSULATION:	PVC - Polyvinyl Chloride
INSULATION JACKET:	Nylon
OUTER JACKET:	PVC - Polyvinyl Chloride
SIZES:	14 - 500 MCM 2 & 3 Conductor with Ground
TEMP DRY/WET:	90°C Dry, 75°C Wet
SCOPE:	Heavy Duty, (double jacketed) Flat, Submersible pump cable suitable for use within well casings for wiring deep well fresh or salt water submersible pumps.
APPROVALS:
HYDROFLEX - Flexible Rubber Submersible Pump cable
P7326-SP Water Well - Flat, Mining Series
DESCRIPTION:	PUMPWIRE 1kv
VOLTAGE:	600/2kV
INSULATION:	EPR - Ethylene Propylene Rubber
OUTER JACKET:	CPE - Chlorinated Polyethylene Rubber
SIZES:	4 - 500 MCM
TEMP DRY/WET:	90°C Dry, 90°C Wet, Min. ambient temp. -40°C
SCOPE:	Extra Flexible, high ampacity, Flat Rubber Submersible Pump Cable for use within well casings for wiring deep-well submersible water pumps, mining applications. Hydroflex is especially efficient for use in municipal applications, cold weather and high ampacity requirements.
APPROVALS:
Flat Yellow Submersible Pump Cable
P7014-SP Water Well - Flat
DESCRIPTION:	600 Volt 3/C with Ground PVC Power & Control
VOLTAGE:	600V
INSULATION:	PVC - Polyvinyl Chloride
SIZES:	14 - 6 AWG, 3 CONDUCTOR with Ground
TEMP DRY/WET:	90°C Dry, 75°C Wet
SCOPE:	Flat, Submersible pump cable PVC insulation without jacket suitable for use within well casings for wiring deep well fresh or salt water submersible pumps.
APPROVALS:
PUMPWIRE - Heavy Duty Flat Submersible Pump Cable
P7272-SP Water Well - Flat
DESCRIPTION:	600V 3/C without Ground THHN/PVC Power & Control
VOLTAGE:	600V
INSULATION:	PVC - Polyvinyl Chloride
INSULATION JACKET:	Nylon
OUTER JACKET:	PVC - Polyvinyl Chloride
SIZES:	14 - 500 MCM 3 Conductor without Ground
TEMP DRY/WET:	90°C Dry, 75°C Wet
SCOPE:	Heavy Duty, (double jacketed) Flat, Submersible pump cable suitable for use within well casings for wiring deep well fresh or salt water submersible pumps.
APPROVALS:
PUMPWIRE 1kv
P7370-SP Water Well - Flat
DESCRIPTION:	1000 Volt 3/C no Ground XLPE/PVC
VOLTAGE:	1000V
INSULATION:	XLPE
OUTER JACKET:	PVC - Polyvinyl Chloride
SIZES:	8 AWG - 2 AWG
TEMP DRY/WET:	90°C Dry, 75°C Wet
SCOPE:	1000 volt, Heavy Duty Flat pump cable three conductors without ground suitable for use within well casings for wiring deep well fresh or salt water submersible pumps.
PUMPWIRE - Armored Flat Submersible Pump Cable
P7369-SP Water Well - Flat
DESCRIPTION:	600 Volt 3/C with Ground THHN/PVC/Galvanized Armor Power
VOLTAGE:	600V
INSULATION:	PVC - Polyvinyl Chloride
INSULATION JACKET:	Nylon
OUTER JACKET:	PVC - Polyvinyl Chloride
SIZES:	14 - 500 MCM, 2 & 3 Conductor without Ground
TEMP DRY/WET:	90°C Dry, 75°C Wet
ARMOR:	Galvanized Steel
SCOPE:	Heavy Duty, (double jacketed) Flat, Submersible pump cable with flat armor suitable for use within well casings for wiring deep well fresh or salt water submersible pumps where maximum mechanical protection is desired.
APPROVALS:
HYDROFLEX - Flexible Rubber Submersible Pump cable
P7327-SP Water Well - Flat
DESCRIPTION:	600 Volt 2 & 3/C with Ground Flexible EPR/TPE Power & Control Cable
VOLTAGE:	600V
INSULATION:	EPR - Ethylene Propylene Rubber
OUTER JACKET:	TPE - Thermoplastic Elastomer
SIZES:	#12 - #6 AWG 2 & 3 Conductor with Ground
TEMP DRY/WET:	90°C Dry, 90°C Wet, Min. ambient temp. -40°C
SCOPE:	Extra Flexible, High Ampacity, Flat Rubber Submersible Pump Cable suitable for use within well casings for wiring deep-well submersible water pumps.
APPROVALS:
SUBMERSIBLE PUMP CABLE
P7324-SP Water Well - Flat, Medium Voltage
DESCRIPTION:	5000 Volt 3/C with Ground Tested Good for 2.4kV per NEC XLPE/PVC
VOLTAGE:	2400V
INSULATION:	XLPE
OUTER JACKET:	PVC
SIZES:	6 AWG - 2/0
TEMP DRY/WET:	90°C Dry, 90°C Wet
SCOPE:	Flat 5000v submersible pump cable with cross-linked XLPE insulated circuit and grounding conductors and an overall PVC jacket. Tested and rated for up to 2.4kV per NEC. Suitable for use within well casings for wiring deep-well submersible water pumps.
APPROVALS: